It prompts you for a firmware upgrade, and to create an administrator password. You pick one and enter the network password (i.e. After agreeing to the license (see Cons), it shows you the available networks. It asks for a PIN which is printed on the device's label. You connect to the extender's built-in access point. I credit the MIMO beamforming in the range extender for making a better connection to the access point than my HTPC could make on its own. Wired to the extender, it measured ~87 or ~141 Mbps (oddly enough, it was binary that way, with transfer rates hovering around 87 Mbps for a minute, then around 141 Mbps for a minute, then back down to ~87 Mbps). Without the extender, my HTPC with a two-antenna dual-band PCIe card measured 32 Mbps on the 2.4 GHz band and 38 Mbps on a weak 5 GHz signal. Although you'd think this would be no better than a good dual-band PCIe wi-fi card, I saw a tremendous boost in speed when using ethernet to the range extender. The gigabit ethernet port allows you to skip the second wireless connection for wired clients, in effect, using the range extender as a wireless bridge. 5 GHz clients in the vicinity performed the same (LG G2, 68 Mbps at -81 dBm without extender, 70 Mbps at -62 dBm with) or dropped in speed (laptop with D-Link DWA182, 72 Mbps without extender, 39 Mbps with). A 2.4 GHz client positioned about 3/4 of the distance to the extender measured 22 Mbps (at -68 dBm) when connected directly to the access point, and 54 Mbps (at -52 dBm) through the extender. In one test, I placed the range extender 40 feet (and three walls) from my access point. However, if your client's speed is degraded due to low signal strength from your access point, you can actually get a faster connection through a repeater. It's true that connecting through a wi-fi repeater reduces the maximum available bandwidth. It is rated for speeds up to 300 Mbps (2.4 GHz) and 867 Mbps (5 GHz) and it automatically chooses the fastest available connection to your access point for the network traffic it relays to nearby clients. You'll get the best result by connecting it to your access point with on both the 2.4 GHz and 5 GHz bands. Pros: This range extender does very well at latching onto a remote signal and rebroadcasting it for nearby clients. Linksys AC1200 Dual-Band Wireless Range Extender, RE6700Īdditional Information Date First Available Web Browser: Internet Explorer 8, Safari 5 (for Mac), Chrome, or Firefox 8 or higher for optional browser-based configurationĬutting-edge technology from the networking leader Mac: Wi-Fi enabled Mac with CD or DVD drive, running OS X Leopard 10.5.8 or later, Snow Leopard 10.6.1 or later, Lion 10.7 or later, or Moutain Lion 10.8 or later PC: Wi-Fi enabled PC with CD or DVD drive, running Windows XP SP3, Windows Vista SP1 or later, Windows 7, or Windows 8 Wireless: Existing a/b/g/n wireless router or access point Learn more about the Linksys RE6700 Model Brand
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |